The N-680D is an air operated heat transfer machine with a 15"X15" heat platen. When the upper platen is lowered by hand, It will trip a micro switch just before closure, and the machine will take over applying your preset pressure. At the end of the preset time, the heat press will open automatically for you. This heat press helps reduce operator fatigue in long production runs. It is also very useful in heavy traffic tourist retail shops where numerous garment types, such as sweats and t-shirts, are continoulsy being produced. Because it is air operated, you can set the amount of pressure on the machine and it will adjust automatically to the product no matter what the thickness of the substrate! The N-680D features a digital timer that is adjustable up to 999 seconds, shows time countdown on readout, beeps after elapsed time, and resets when handle is raised. The calibrated digital temperature control is adjustable up to 450F and displays the current temperature. You can easily set the air pressure with the knob and see the psi reading on the gauge. With teh pre-press release, you can start pressing your garment before applying the transfer to get the wrinkles and them push the button to open the machine so you do not have to wait for the set time to count down. It is a stop cycle switch that will release the upper platen at that moment. 

Air Compressor Requirements for the N-680D and N-880D:
Supply a clean (void of oils) and dry (void of water) air source of 100-125 P.S.I. (6.8-8.5 bar) to the 1/4" NPT air inlet of the machine. Requires 1-1/2 to 2 CFM. It is strongly recommended that an external air filter and water trap to be installed at the machines's air inlet connection. Damage to the machine's internal air operated components can occur that will not be covered under warranty if it is determined that water, oil or other contaminants have damaged the component. Combination air filter/water traps are available at any major hardware store or may be purchased from us.

Heavy duty, even heat press platen.

Push the handle down slightly and the air assist takes over, applies the set psi pressure, then will auto release on its own when the time has elapsed.

Just set the air psi and no other pressure adjustment is needed in between products of different thickness.

Digital timer is adjustable up to 999 seconds and shows time countdown on readout.

Calibrated digital temperature control is adjustable up to 450F (232C) and displays the current temperature.

Release button allows you to open up the platen before the time has elapsed so that you can press out wrinkles.

Utilizes a gas shock air assist system.

Applies all types of transfer paper on items up to 3/8" thick.

Press opens a full 40 degrees for easy placement of heat transfer substrates.

Optional Shuttle System allows you to layout a product and transfer while another is transferring.

Air compressor and water separation trap required.

Weight - 126 pounds

Lifetime warranty on heating element and 1-year warranty on components.

ETL-US, ETL-Canada, and CE certified.